General Motors Opel TIS & Global TIS2Web & Tech2Win-vmware (2010) Great dealership software from General Motors. Is designed to carry out diagnostics and programming all car companies GM, such as Opel, GM, Saab, etc. Reset GM Nav radio TheftLock with Tech2 scanner in 10 steps. Here is the step-by-step instruction on clear radio theftlock for GM ( GM, SAAB, OPEL, SUZUKI, ISUZU and HOLDEN ) models with GM Tech 2 sc. With GM TIS 2000 programming software Vetronix Tech 2 can support programming functions. Some customers may confused set up it. Below OBD2Tuning sharing How to set up GM TIS 2000 programming software for Vetronix Tech 2. GM TIS 2000 software tis 2000 security key for GM TECH2 GM Car. How to set up GM TIS 2000 programming software: 1. A BIG leap forward for our Running TIS 2000 on Windows 7/8/8.1/10 technical document - from Revision 0.3 to Version 1.0!This release includes a new 'Online Resources' section that I'm sure some folks will find valuable, as it lists some distribution points for some of the crown jewels you need to successfully use your new 'GYMKO' Tech 2 (J2534) Diagnostic Scan Tool clone to its' fullest extent!

What is TIS 2000 Software?

TIS 2000 is abbreviation of Techline Information System 2000 software application.TIS 2000 is actually a group of serveral programs that perform the following functions:

Service Programming System(SPS)

Tech 2 Updating

Tech 2 Snapshot Uploading and Analysis

TIS 2000 Software Language Support:

English, Italian, French, Portuguese, German, Spainish, Korean, Japanese, Thai, Chinese

TIS 2000 Software Support Vehicle Models:

Gm Tis Software Download Software

GM-English 32.008 1991-2013

GM-German 32.008 1991-2013

GM-Spanish 32.008 1991-2013

GM-Japanese 32.008 1991-2013

GM-French 32.008 1991-2013

GM-Thai 32.008 1991-2013

GM-Portuguese 32.008 1991-2013

GM-Korean 32.008 1991-2013

SAAB

SAAB-English 148.000

OPEL

OPEL-English V180 1997-2014

OPEL-Italian 133.001 1997-2012

OPEL-German 85.001 1997-2008

OPEL-Spanish 91.001 1997-2009

Holden

HOLDEN-English V149 1999-2013

SUZUKI

SUZUKI-English 01.210.020

ISUZU

ISUZU-English CAN-BUS 107.021 2010- (CAN-BUS support car models after 2010)

ISUZU-English K-Line 11.62 1996-2013 (K-line support car models from 1996 to 2011)

(If you want ISUZU software, please tell us you want CAN-BUS or K-line)

Global TIS 2000 software, free download:

TIS2000 Software:

TIS 2000 Dongle Crack Download:

Opel-Vauxhall TIS 2000 v96 Multilanguage

Gm Tis software, free download

Opel-Vauxhall TIS 2000 v116.0E Multilanguage

O.S.: Windows XP; Windows Vista; Windows 7; Windows 8
– CPU: Pentium/Athlon 1 GHz or higher
– RAM: 256 MB of system memory
– Hard Drive: 5 GB of available space
– DVD-ROM

Opel TIS 2000 Download:

SAAB Global TIS Free Download:

SAAB GlobalTIS 1.2010:

SAAB GlobalTIS1.2010 Activation:

Opel GlobalTIS V32B:

PASS: cartechnology.co.uk

The support Languages they are ONLY these:
– Italian
– German
– French
– Dutch

TIS2000 Software Installation Guide:

Method 1:

A lot of info I found over at SaabCentral but it is just a giant thread to read through although a lot of the info is on the first page. And a lot doesn’t apply since it’s geared towards Saab (even the 9-7x doesn’t apply, it’s under GM).

So you have a Tech2 but a lot of the things you would like to do is locked out because you don’t have access to the computer software to allow you to do it. Things like updating PCM’s and modules and anything security related are locked out. If you bought one of the Tech2 clones, it probably came with a CD with the Tis2000 software. If you install it and try to use it, it says that it can’t find the USB security dongle or something like that. That’s because only dealers have those or a clone of one wasn’t included.

First of all, this is old software. It was discontinued in 2008 by GM which means that it works only for vehicles up to model year 2007. It will have PCM and module updates included. For example, I was able to update all of the modules and PCM in my 2006 9-7x even though it had only been a year or two since production and issue of this software. It will also allow you to reprogram a module that you are replacing.

The Tech2 communicates with the computer using a serial port on the computer running Windows XP SP3. This can be a problem if you only have newer computers. Best and easiest scenario is to use an older laptop computer that has a serial port running windows XP. In my setup, I used an old IBM T40 laptop, which is fairly decent processor wise, installed a fresh copy of Windows XP SP3 and used a docking station with it that has a serial port. Laptops that have actual serial ports built in are probably so old that they are too slow or have age and reliability issues. Another solution would be to get a USB to serial port adapter and specify the proper COM port number during the install of Tis2000.

Another possible solution would be to use a virtual environment on a host computer. VMWare is free to use and it has been done from what I read but could be a fairly involved process because of the serial port issue, especially when using a USB to serial adapter. The challenge of communicating from the virtual environment through the real computer’s hardware ports can make it difficult but can be done. I’m not going to discuss this type of installation but the basic software installation and use will be the same. If anyone gets a virtual install working, please post it up.

In some detail, this is what I did. Keep in mind that you should have some computer knowledge and know how to install Windows.

1. Installed a fresh copy of Windows XP SP3. I didn’t bother with updating anything else as far as security updates to Windows or install a virus scan because this computer will never be connected to the Internet or used for anything else.

2. Installed ALL the required drivers until there were no more yellow check marks in Device Manager. I failed to do this at first and caused a lot of headaches later, including a BSOD during software installation.

3. If you’re using a USB to serial adapter, plug it in now and set it up. Go into Device Manager and make note of the COM port used by the adapter.

3. Install the Tis2000 software from the CD included with the Tech2. During the install, it will ask you to specify the COM port. If you have a serial port on the computer, it’s probably COM 1 or use the one from the USB adapter.

4. Before you can use Tis2000 with your Tech2, you have to make it “think” that there is a dongle connected that authorizes it. You can download the crack below. Follow the read me file for instructions on how to use it.

That’s it. More threads will come explaining how to do stuff with it but this will get you going.

And if you need them:

TIS2000 Software(Extracted from my CD)

Tis2000 Dongle Crack
When you click on the links, they will bring you to 4Shared, click on “Free Download”, a little window will pop up asking to log in using either a social media account or sign up for an account. Sign up with an email and password and then create a name. After that, you will be brought back to the download page and the 60 second timer will count down, after which the download will start.

Warning: In Tis2000, whatever you do,DO NOT USE THE “SOFTWARE DOWNLOAD” BUTTON!This will retrograde the card in your Tech2 to an old version from 2008.

Some more install info, especially for VM’s, is also available in this thread from SaabCentral.

Method 2:

Insert TIS2000 software CDinto the laptop
2) Install the setup driver in the CD
3) Select Activator. Select first one Activator hardware key
4) Load DATA DVD (tis2000+data+0802) to run TIS200 on desktop after compete install the setup. TIS2000 will update the data automatically.
5) Find out and locate SuperPro.dll file in TIS2000 crackfile folder after update data and copy the SuperPro.dll file to “C:Program filescosidsbin”
6) Then run TSI2000 software
7) Connect GM Tech2 device with computer
8) Start ECU programming and follow the windows prompts.

If you order GM Tech2 scanner with Saab software, you’d better choose Saab TIS2000 CD with USB key.